- 1). Disconnect the negative battery cable from the negative battery terminal. Loosen the bolt on the cable's clamp with the 10 mm wrench, remove the cable from the negative lead post, and rest the cable away from the battery.
- 2). Connect the stereo wiring, in the now vacant stereo mounting dock, to a wiring harness adapter. The wiring harness adapter will be labeled to illustrate where you are to make the appropriate connections.
- 3). Slide the Ford radio installed kit faceplate adapter into the stereo mounting dock. Feed the wiring harness adapter through to the front of the faceplate adapter.
- 4). Connect the leads of the wiring harness adapter to the outlets on the back of the aftermarket stereo. Slide the aftermarket stereo into the opening provided by the Ford faceplate adapter.
- 5). Place the negative battery cable clamp around the negative lead post of the Ford battery. Tighten the bolt on the clamp with the 10 mm wrench so that the clamp cannot move freely about the lead post.
previous post