- 1). Eject any CDs in the existing radio. Put your truck in gear, set the parking brake and remove the keys.
- 2). Place the front edge of your panel tool behind the edge of the front receiver and instrument trim panel. This is a large panel that surrounds the radio, climate controls and the main instrument cluster. Pry outwards to release the clips that hold the radio in place. Continue around the perimeter of the trim panel until it's completely loose. Remove the trim panel from the dash and set it aside.
- 3). Push down on the plastic tabs on either side of the radio. Pull the radio towards you and out of the dashboard.
- 4). Unplug the two wire connectors and the antenna cable from the back of the radio.
previous post