- 1). Open both front doors and pull down on the fuse panel cover to remove it.
- 2). Remove the screw at the top of the fuse panel that holds the dash in place using a screwdriver.
- 3). Remove the two screws on the top of the dashboard in the center of the driver's side of the dashboard using a screwdriver.
- 4). Remove the two screws that hold the lower dash panel to the steering column.
- 5). Unplug the two electrical connectors behind the lower dash panel and the two electrical connectors behind the main dash panel.
- 6). Pry up the dash panel starting from the driver's side using your hands. If you are having trouble getting it started, use a flat head screwdriver to pry up on a section of the dash near the driver's side door. Once the dash has been removed, you can pull the radio out.
- 7). Remove the two screws that hold the radio in place and pull the radio forward.
- 8). Unplug the electrical connectors from the back of the radio.
- 9). Plug the electrical connectors into the replacement radio.
- 10
Slide the radio into the dash. - 11
Mount the new radio with the factory retaining screws. - 12
Plug the four electrical connectors back in and snap the dash back into place. Then secure the dash with the factory mounting screws.
previous post