- 1). Enter your car with all of your doors closed besides your driver's side door and unlock the doors with the tab on the driver's door.
- 2). Insert and remove your key from the ignition twice, close and open the door twice, insert and remove the key from the ignition one more time and then close and open the door twice more.
- 3). Insert the key into the ignition again, close the door again, turn the key "On" and then "Off" and remove the key from the ignition.
- 4). Wait for the door locks to cycle and hold both the unlock and lock keys on your remote for two seconds.
- 5). Release the two buttons and hold the lock key by itself until the door locks cycle again and release. This will finish the programming sequence.
previous post