- 1). Enter your Ford Thunderbird with your keyless remote and ignition key in hand.
- 2). Insert the key into the ignition and cycle the key from "Off" to "Run" eight times in quick order, ending the cycle on "Run" after the eighth rotation.
- 3). Press any button on your keyless remote within 20 seconds and wait for the locks to cycle to indicate successful programming.
- 4). Repeat step three for any additional remotes, within 20 seconds of the last remote and waiting for the locks each time.
- 5). Turn the ignition to the "Off" position and wait for the locks to cycle again, indicating the end of the programming sequence. You will now be free to use your programmed Ford Thunderbird remotes.
previous post
next post