- 1). Turn the key in the ignition to the "On" position.
- 2). Press either the lock or unlock button on the keyless entry remote.
- 3). Turn the key in the ignition to the locked position.
- 4). Repeat the first three steps twice.
- 5). Turn the ignition to the on position again.
- 6). Press the lock or unlock button on the remote you have been programming to verify that it has completed the programming process.
- 7). Press the lock or unlock button on all remaining remotes to program them. If they are successfully programmed, the locks will cycle when you press the button.
- 8). Turn the key to the "Off" position so the receiver will exit the programming mode.
- 9). Test all remote controls.
previous post