- 1). Attach the baby bicycle seat support bar to the seat post. Clamp it between the bicycle seat and the bicycle frame. Tighten the screws that hold the clamps together to secure that side of the support bar in position.
- 2). Clamp the other side of the support bar to the head tube, located just below the handlebar steering stem. Tighten those screws to secure the clamp.
- 3). Place the baby bicycle seat so it sits forward facing on the support bar.
- 4). Insert a thumb screw into the appropriate location just behind the seat.
- 5). Slide the seat back and forth so it sits in the location you desire. Make sure you can turn the handlebars about 30 degrees in each direction so you can adequately maneuver the bicycle with the seat in front of you.
- 6). Tighten your thumb screw to set the baby bicycle seat in its preferred location.
previous post
next post