- 1). Move the Maytag Bravos washer away from the wall, then unplug the power connector from the wall outlet.
- 2). Remove the three screws from the back of the control panel using a Phillips screwdriver.
- 3). Lift the control panel toward the front of the washer. Locate the lid lock control connected to the top door of the washer.
- 4). Disconnect the wires to the lid lock control using needle-nose pliers.
- 5). Remove the screw connecting the lid lock control to a mounting plate, using a Phillips screwdriver.
- 6). Lift and remove the entire lid lock control. Reinsert a new lid lock control part into the same position.
- 7). Reinsert the screw into the mounting plate to hold the lid lock control in position.
- 8). Reconnect the wires to the lid lock control. Lower the control panel back into place.
- 9). Reinsert the three screws into the back of the control panel, then reconnect the power supply to the wall outlet.
previous post