- 1). Place a small mark with your pencil where you want the magnets to go. Make sure that they will be out of the way. If the door is metal, you can even place the magnets on the shower wall, so that when the door closes, the magnets will pull and hold the door shut.
- 2). Clean the surfaces of your shower with a clean rag and some water. If you are bonding the magnets to glass, make sure to use glass cleaner to ensure a clear bonding surface. Wipe the water off the shower door with the rag, drying it.
- 3). Open your bottle of superglue. Use the top of the container to puncture the seal underneath the lid. Make sure not to puncture the bottle otherwise.
- 4). Place a small dab of superglue onto the surface of the magnet that you will be gluing to the wall. Don't overglue, and don't get any on your hands. Once the glue is in place, immediately stick the magnet to the door or wall. Place them on the marks that you made in Step 1.
- 5). Hold the magnet in place until it adheres, which should be no more than two to five minutes. Let go, and then let the magnets sit in place another hour before using.
- 6). Try pushing the magnetic door onto the wall, making sure that it sticks; then try pulling it off, making sure the magnets don't hold the door and wall together too strongly.
previous post
next post