- 1). Locate the gas cap. Depending on the configuration of the boat, the gas tank will be located at either the port side rear near the transom or directly at the nose of the bow.
- 2). Insert the metal studs at the end of the gas cap key into the holes in the gas cap. The gas cap key is a 2-inch long piece of chrome-plated brass. The studs at either end of the gas cap key are approximately 1/4-inch in diameter and protrude down 3/8-inch from the body of the key. Unscrew the gas cap from the threads in the fuel inlet, counterclockwise. .
- 3). Lift the gas cap off the fuel inlet when it comes loose, completing the removal of the gas cap on a 1989 Bayliner Quantum boat.
previous post