Outdoor lighting is an indispensable part of the Christmas festivities.
It is the Christmas outdoor lighting that brightens the entire neighborhood and enlivens the spirit of the celebrations.
However, setting up the lighting can get annoying and frustrating if you don't go about the task systematically.
Adopt a step by step approach and you will see that the task can be accomplished in a matter of minutes.
Step #1: Chalk out a plan An electric plan detailing the layout of the Christmas outdoor lighting plays a very important role.
You will have to first figure out the electrical points that you can use.
You should also have clarity on the types of lights you want to use and how you want to lay them.
Setting up a proper plan with all points considered is half the work done.
Step #2: Consider all the safety factors Check the lights you intend using for Christmas outdoor lighting.
Ensure the cables are not faulty.
The electrical wires should neither be broken nor torn.
Make sure you clear up the twigs and other dried leaves that can increase the chances of a mishap.
Step #3: Bring out your toolkit Pliers, screwdriver, hammer, measurement tape and extension cords and the most important tools needed to set up Christmas outdoor lighting.
Check to see if you have the relevant hooks to prop up the lights.
Using just about any clip will not suffice.
There are clips that are exclusively designed for this purpose.
Ensure you have them handy.
Do not forget the ladder and the hooks to hold the lighting in place.
Step #4: Set up the hooks and clips Now it is time to bring out the plan your have sketched out and place the hooks and clips in relevant places before setting up the Christmas outdoor lighting.
Make sure there is sufficient space between them.
They should be places such that the lights don't dangle in between.
They should do the perfect job of holding them in place.
One feet gap between each hook should do fine.
Step #5: Bring out the lights and test them You are now nearer to completing the task.
Bring out the vintage Christmas lights or any other type of light you intend using and lay them straight.
Detangle them and ensure there are not breakages in the wire.
Test them to see if all the lights are in the working condition.
Eliminate bulbs that are broken and fix split wires.
Step #6: Put up the lights and check functionality It is now time to set up the Christmas outdoor lighting as sketched out in the plan.
Secure them finely using the hooks and clips.
Finally, power them on and check to see if they are working fine.