- 1). Turn the flat black tension knob counterclockwise until the Smart Vise can fit over the edge of a workbench.
- 2). Push the open end of the Smart Vise over the edge of a workbench.
- 3). Tighten the Smart Vise in place by turning the flat black tension knob clockwise.
- 4). Open the jaws of the Smart Vise by rotating the clamp handle counterclockwise.
- 5). Insert a thin metal workpiece into the jaws of the Smart Vise.
- 6). Close the jaws of the Smart Vise by turning the clamp handle clockwise.
- 7). Release the workpiece when your work is finished by turning the clamp handle counterclockwise.
next post